D-Link Networking DGS-1510-52XMP 52 Port DGS-1510 Gigabit PoE Switch 10GbE SFP+ 370W Brown Box
| Status: | Available |
| SKU: | 214012 |
| Vendor: | D-Link |
| MPN: | DGS-1510-52XMP |
| UPC: | 790069434303 |
| EAN: | |
|
The DGS-1510 Series is D-Link’s latest generation of stackable Gigabit switches with 10G port connectivity, suitable for business networks of all sizes. The DGS-1510 Series provides a reliable, scalable, and modular interconnection between core switches and edge switches with rich capabilities and simplified flexibility. Available in 16, 24 and 48 10/100/1000 Mbps port models, these switches also include four optical ports – including two or four 10G SFP+ ports. Power over Ethernet (DGS-1510-28P, DGS-1510-28XMP and DGS-1510-52XMP only) All 10/100/1000 Mbps ports on the DGS-1510-28P, DGS-1510-28XMP and DGS-1510-52XMP are PoE-enabled, for powering devices such as IP cameras, VoIP phones and wireless access points. Compliant with IEEE 802.3af and IEEE 802.3at, these models support up to 30W of power output on any particular PoE port. The total PoE power budgets are 193W for the DGS-1510-28P, and 370W for the DGS-1510-28XMP and DGS-1510-52XMP. Additionally, the power budget for the DGS-1510-52XMP can be increased to 740W when utilized with the DPS-700 redundant power supply, allowing the switch to power even more devices. Time-based PoE enables power to a port to be shut off at a scheduled time, reducing power usage and increasing security by powering off devices that should not be in use during non-business hours. A unique “PD-alive” feature, ideal for surveillance networks, pings attached PDs (IP Cameras, wireless access points) and resets the PoE power when inactivity is detected. |
|
| General Hardware version : DGS-1510-52XMP: A1 Port Standards and Functions : IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet 802.3ae 10 GbE IEEE 802.3x Flow Control for Full-Duplex Mode Auto-negotiation Number of Ports : DGS-1510-52XMP: 48 10/100/1000 Mbps PoE capable, 4 10G SFP+ Network Cables : UTP Cat. 5, Cat. 5e (100 m max.) EIA/TIA-568 100-ohm STP (100 m max.) Full/Half Duplex : Full/half duplex for 10/100 Mbps and Gigabit speed Media Interface Exchange : Auto or configurable MDI/MDIX |
Performance Switching Capacity : DGS-1510-52XMP: 176 Gbps Transmission Method : Store-and-forward MAC Address Table : 16,000 entries per device MAC Address Update : Up to 512 static MAC entries, Enable/disable auto-learning of MAC addresses Maximum 64 bytes Packet Forwarding Rate: DGS-1510-52XMP: 130.95 Mpps Packet Buffer Memory : DGS-1510-52XMP: 3 MB per device |