Products > Memory > DDR3 Registered Modules SDRAM
Kingston Memory KVR1333D3D8R9S/4G DDR3 1333 ECC Registered Retail

Model :
SKU : 106066
Vendor : Kingston
MPN : KVR1333D3D8R9S/4G

This document describes ValueRAM's 512M x 72-bit 4GB (4096MB) DDR3-1333MHz CL9 SDRAM (Synchronous DRAM) registered w/parity, dual-rank memory module, based on eighteen 256M x 8-bit DDR3-1333MHz FBGA components. The SPD is programmed to JEDEC standard latency 1333MHz timing of 9-9-9 at 1.5V. This 240-pin DIMM uses gold contact fingers and requires +1.5V.
Key Features:
-

Detail Specifications:
1.JEDEC standard 1.5V +/- 0.075V Power Supply

2.VDDQ 1.5V +/-0.075V

3.667MHz fCK for 1333Mb/sec/pin

4.8 independent internal bank

5.Programmable CAS Latency: 6,7,8,9,10

6.Programmable Additive Latency: 0, CL - 2, or CL - 1 clock

7.Programmable CAS Write Latency(CWL) 7(DDR3-1333)

8.8-bit pre-fetch

9.Burst Length: 8 (Interleave without any limit, sequential with starting address 000 only), 4 with tCCD 4

10.which does not allow seamless read or write either on the fly using A12 or MRS

11.Bi-directional Differential Data Strobe

12.Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm + /-1%)

13.On Die Termination using ODT pin

14.On-DIMM thermal sensor (Grade B)

15.Average Refresh Period 7.8us at lower then TCASE 85C, 3.9us at 85C < TCASE . 95C

16.Asynchronous Reset

17.PCB : Height 1.180 (30.00mm), double sided component

18.Warranty: Lifetime

19.Weight: 0.15